Guides
The Cuban triple cap
The triple cap is a way of finishing the head of a cigar using several layers of wrapper leaf, and it is traditionally associated with Cuban hand-rolled cigars. It is a small detail at the end of the cigar, but it shows the skill of the roller and affects how the cigar is cut. This article describes what the triple cap is and how to recognise it.
What a cap is
Every parejo cigar has a cap at the head, a small piece of wrapper leaf that seals the closed end and holds the outer leaf in place. The cap is attached with a natural, flavourless adhesive. Without it the wrapper would unwind from the head as the cigar was handled and smoked.
What makes a cap triple
A triple cap is generally described as a head finished with three layers of wrapper. The wrapper is wound to the head, then a small piece is applied over it, and a final rounded piece is added at the very end. The result is a smooth, domed head with a visible line or lines where the layers meet. Descriptions of the exact construction vary, and rollers use their own methods.
Why it is associated with Cuba
The triple cap is commonly linked with Cuban-style hand rolling, and many Cuban brands are known for it. It is a traditional technique rather than a legal standard, and cigars from other countries can have one too, just as some Cuban cigars use other finishes. Treat it as a sign of a certain rolling tradition, not as a proof of origin.
How to cut a triple-cap cigar
The thickness of the cap suggests cutting only a small amount. The aim is to open the head just below the curve of the cap, where the cut exposes the filler without unravelling the wrapper. A shallow straight cut near the start of the shoulder is the usual approach. Cutting too deep can loosen the wrapper and cause it to peel.
Triple cap and other finishes
Some cigars have a pigtail, a twisted extension of the cap, or a pointed head that belongs to a figurado shape. These are described in Pigtail caps and shaggy feet. The overall layout of the cigar is outlined in Anatomy of a cigar.
Why caps are made with care
The cap does more than finish the cigar's appearance. It has to be strong enough to hold the wrapper at the head through handling, cutting and smoking, yet thin enough that it can be cut cleanly. If a cap is poorly applied it may lift, and a lifted cap can cause the wrapper to unravel from the head. For this reason, the quality of the cap is taken as a sign of how carefully the whole cigar was made.
The cap in other cigars
Not every cigar uses a triple cap. Other methods include a single cap and a two-piece cap, where fewer layers are used. Some makers apply a flag cap, in which the end of the wrapper leaf itself is folded and sealed to form the head. The practical difference to the smoker is small. What matters is that the head is smooth, firmly sealed and free of loose pieces.
A small tip on cutting
If you are unsure where to cut, look for the line where the cap meets the body of the cigar. Cutting above this line, within the cap, avoids damaging the wrapper under it. Use a sharp cutter, because a dull blade tends to crush the head and may tear the wrapper. A clean cut opens a neat aperture and makes the first draw easier.
In short
The triple cap is a layered finish at the head of a cigar, linked to the Cuban rolling tradition. It is a sign of care rather than proof of origin, and it asks for a shallow cut so the wrapper stays intact.
Frequently asked questions
Is a triple cap a guarantee that a cigar is Cuban?
No. It is a traditional rolling technique associated with Cuba, but other makers use it and some Cuban cigars use different finishes.
How much of the head should I cut?
Only a small amount. A shallow cut near the shoulder of the cap opens the head without damaging the wrapper.
Why is the cap attached with adhesive?
The cap needs to be stuck down so the wrapper stays in place at the head. The adhesive used is natural and has no taste.
Reader questions
Questions & answers
No questions yet. Ask the first one.
