• Secure payment

Guides

Construction faults: plugs, soft spots and cracks

By Vitola Room Editorial TeamVitola Room Editorial · 3 min read
A cigar cut open to show a blockage in the filler

Even carefully made cigars can have construction faults, such as a plug that blocks the draw, a soft spot where the filler is thin, or a crack in the wrapper. Knowing what each fault looks like and what causes it makes it easier to judge whether a problem is a small annoyance or a sign that a cigar is not worth continuing. This guide describes the common faults and the usual responses.

Plugs

A plug is a blockage inside the cigar that makes it hard or impossible to draw. It is usually caused by filler leaves packed too tightly or arranged so that they close off the air channels. A plugged cigar feels very firm, and when you draw on the unlit cigar you meet strong resistance. Sometimes a plug can be eased by gently rolling the cigar between your fingers, but a severe plug may be best abandoned.

Soft spots

A soft spot is a place where the cigar gives under light pressure because the filler is thin or unevenly distributed there. It can cause the cigar to burn faster in that area and can produce a hot, harsh smoke. A cigar that feels spongy overall may simply be too humid, but a single soft patch more often points to a gap in the filler.

Cracks in the wrapper

A wrapper can crack because it is dry, because the cigar has been bent, or because the leaf was weak to begin with. A small crack may be harmless, but a spreading one can unwind and expose the binder. If a wrapper begins to split, you can sometimes slow it by keeping the cigar level and smoking more slowly, though a repair is rarely worth the effort.

Drawing and burning problems

Faults in construction show up as an uneven burn, such as canoeing, where one side burns faster than the other, or tunnelling, where the centre burns down faster than the outside. A very loose draw can cause the cigar to burn hot, while a very tight one makes it hard to keep alight. The mechanics are discussed in How a cigar burns.

What to do

Check a cigar before lighting it by looking at the wrapper, feeling its firmness along the length, and testing the draw after cutting. If the problem appears early, you may wish to set the cigar aside. Faults are usually isolated to a single cigar, not a whole box. For the parts involved, see The filler (tripa) and The binder (capote).

Faults versus personal preference

Not everything that looks unusual is a fault. A slightly uneven colour, a shaggy foot or a soft cigar from humid storage may be normal. A true fault is one that stops the cigar from smoking well, such as a total plug, a major crack or a large void. Learning to separate harmless quirks from real problems saves you from discarding good cigars and from struggling with bad ones.

Some faults come from storage rather than construction. A cigar that has dried out can crack and burn hot, and one that has become too moist can feel soft and refuse to stay lit. Before judging a cigar's construction, consider whether it has been kept in stable conditions. If a dry cigar is rested for a while in a suitable environment, it may improve, though a cracked wrapper will stay cracked.

Handling a difficult cigar

If a cigar draws too tightly, check that the cut is clean and open. If it is still tight, a thin tool may be used to open a channel, but force can damage the cigar. If the draw is too loose, smoke more slowly to keep it cool. When a cigar has a real fault, the simplest remedy is to put it aside and light another, rather than persist with an unpleasant smoke.

Frequently asked questions

What causes a plug?

Usually filler leaves packed too tightly or arranged so they block the air channel through the cigar.

Is a soft spot a serious problem?

It can lead to a hot, uneven burn in that area, though it depends on how large it is.

Can a cracked wrapper be saved?

Sometimes you can keep smoking carefully, but a spreading crack often means the cigar will not hold together well.

Reader questions

Questions & answers

No questions yet. Ask the first one.