• Secure payment

Guides

The V-cut

By Vitola Room Editorial TeamVitola Room Editorial · 3 min read

The V-cut, sometimes called a wedge cut or cat's eye cut, removes a V-shaped notch from the head of a cigar rather than slicing it flat. It leaves a ring of cap around the opening and channels the draw through a single narrow groove.

How a V-cut works

A V-cutter has a blade, usually shaped like a shallow wedge, that bites into the head of the cigar. The cigar sits in a cradle and the blade is pressed through the cap in a single motion. Instead of a round hole or a flat face, the result is a notch with two angled sides.

The cut concentrates airflow. Smoke is drawn through the notch, which many smokers say gives the cigar a slightly firmer, more focused draw than a full straight cut.

Reasons smokers choose it

The main attraction is that much of the cap stays in place. Because the cap is what holds the wrapper at the head, leaving most of it intact lowers the risk of the wrapper unravelling.

A V-cut can also help keep loose tobacco out of the mouth, since the opening is smaller than a full cut. For smokers who find a wide straight cut too open, it offers a middle path between a punch and a guillotine.

Drawbacks to consider

The same narrowness that helps focus the draw can be a problem on a cigar that is already firmly packed. A V-cut on a tight cigar may leave the draw too restricted to enjoy.

Depth also matters. A shallow wedge on a large ring gauge may expose only a small part of the filler, so the draw can feel starved. Conversely, a very deep V can approach the body of the cigar and begin to damage the wrapper. As with any cut, restraint and a sharp blade are the keys.

Using a V-cutter

  1. Open the cutter and rest the head of the cigar in the cradle.
  2. Align the blade so it crosses the cap near the centre, not the body.
  3. Press the blade through in one clean motion.
  4. Look at the notch and check that the filler is visible and the cap remains around it.
  5. Take a dry draw to test the airflow before lighting.

Some smokers rotate the cigar slightly between a first and second notch to open the draw further, though one notch is normally enough.

V-cut versus other cuts

Compared with a guillotine cut, the V-cut keeps more cap and narrows the airflow. Compared with a punch, it exposes more filler and produces a larger channel. Which is best depends on the cigar, its ring gauge and the smoker's preference.

Thicker cigars are generally easier to cut with a V-cutter than thin ones, because there is more room for the wedge. Very thin cigars can be split or crushed by a blade meant for a larger gauge.

Keeping blades in shape

Like any cutter, a V-cutter needs sharp steel. A dull edge will tear rather than cleanly notch the cap. Wipe the blade after use, keep it dry and replace the tool when the cut starts to feel ragged.

Practice and judgement

Like most skills in cigar smoking, the V-cut improves with repetition. A first attempt may leave the notch too shallow or off centre, and that is normal. The useful habit is to look at the result each time and note what the draw feels like. Over several cigars, you will learn how deep a notch works best for the ring gauges you smoke most often. It also helps to keep a spare cutter of a different type on hand, in case a particular cigar does not suit the V shape. Flexibility is part of the craft, and no cut is a rule that must be followed for every cigar.

Frequently asked questions

What is a V-cut also called?

It is also known as a wedge cut or a cat's eye cut. All three names describe a notch cut into the head of the cigar.

Is a V-cut better than a straight cut?

Neither is better in every case. A V-cut keeps more of the cap and focuses the draw, while a straight cut opens more of the head. The best choice depends on the cigar and personal taste.

Can a V-cut make the draw too tight?

It can, particularly on a firmly rolled cigar or a shallow cut. If the draw feels restricted, a second small cut can open it up.

Reader questions

Questions & answers

No questions yet. Ask the first one.