Guides
Types of cigar cutters
A cigar cutter is a small tool that removes the closed end of a cigar, called the cap, so smoke can travel from the foot to the mouth. Cutters come in several designs, and each one opens the head of the cigar in a different way, changing airflow, how the cigar feels in the mouth and how much risk there is of damaging the wrapper.
Why the cutter matters
A cigar is sold with its head sealed. The sealed end is not a flaw: it keeps the wrapper leaf secure during ageing, storage and transport. Before smoking, the head has to be opened, and the way it is opened shapes the whole experience. A clean opening gives an even draw and lets the smoker taste the blend as intended. A ragged or crushed opening can cause a tight draw, loose tobacco in the mouth or a wrapper that begins to unravel.
Because of this, the cutter is one of the few accessories almost every smoker eventually owns. The market offers many shapes and materials, but most designs fall into a handful of families.
Guillotine cutters
The guillotine is the most familiar type. It has one or two blades that slide across a round or oval opening. The cigar head is placed in the opening and the blade shuts across it in a single motion, leaving a flat, straight surface.
Single-blade versions are simple and often inexpensive. Double-blade versions cut from both sides at once, which tends to give a cleaner result because the leaf is not pushed in one direction. A guillotine works best on parallel-sided cigars and needs an opening wide enough for the ring gauge being cut. See the dedicated article on the guillotine cut for technique.
V-cutters and wedge cutters
A V-cutter removes a notch shaped like a wedge from the head instead of slicing it flat. The cigar rests in a cradle and the blade presses a V-shaped cut into the cap. Some people prefer this style because it concentrates the draw into a single channel and leaves most of the cap intact around the edge.
The opening is narrower than a straight cut, which can make the draw feel firmer. Our article on the V-cut covers when that is an advantage and when it is not.
Punch cutters
A punch cutter does not slice the cap at all. It bores a small round hole into the centre of the head, a bit like a tiny cookie cutter. Punches are often built into keychain cutters or sold as small separate tools.
Because the cap stays on, the wrapper is rarely disturbed. The trade-off is a small opening, which can concentrate smoke and moisture in one spot. Punches also tend to suit cigars of moderate ring gauge. The punch cut has its own entry in this series.
Scissors and knives
Cigar scissors have short, sharp blades designed for a precise cut and are often favoured for tapered heads. A pocket knife can cut a cigar in an emergency, but it is harder to control and easy to crush the head if the blade is dull. Scissors are discussed in a separate article, as are the special considerations for figurado shapes.
Some smokers also use a fingernail or a sharp bite to remove the cap. This is not recommended, since it tears the wrapper and often leaves the head soggy.
Choosing between them
No single cutter is best for every cigar. A few practical points help:
- Blade sharpness. A dull blade crushes the head. Sharp steel is more important than the brand or design of the tool.
- Opening size. The cutter must fit the thickest cigar you smoke.
- Cigar shape. Straight-sided cigars suit guillotines and punches; tapered shapes often call for scissors or a V-cutter.
- Portability. Small pocket cutters are convenient, though larger table cutters are steadier.
Many smokers carry two tools, for example a guillotine and a punch, and choose according to the cigar in hand.
Care and maintenance
Blades benefit from occasional cleaning to remove tobacco residue and oils. A soft cloth and a drop of light lubricant suitable for tools usually suffices. Avoid scented oils, which can transfer to the cigar. Store the cutter dry, and replace or have it sharpened when it starts to tear rather than slice.
A note on materials and fit
Cutters are made from many materials, including stainless steel, brass, wood and plastic, and they range from plain pocket tools to elaborate desk pieces. The material rarely matters as much as the edge: a well-sharpened steel blade in a plain handle will outperform a decorative cutter with a poor edge. When shopping, check that the blades meet cleanly, that the mechanism closes smoothly and that the tool feels comfortable in the hand. A cutter that is easy to hold is also easier to use with confidence, and confidence is what produces a clean cut. Over time most smokers settle on one or two favourites and learn exactly how much pressure each one needs.
Frequently asked questions
Which cigar cutter is best for beginners?
A sharp double-blade guillotine is a common starting point because it is simple to use and gives a predictable flat cut. The most important factor is sharpness rather than the exact design.
Does the type of cutter change the flavour?
The cutter does not change the tobacco, but it changes the size and shape of the opening, which affects airflow and how smoke reaches the palate. Different cuts can make the same cigar feel tighter or more open.
Can I use scissors from the kitchen to cut a cigar?
Household scissors are usually too thick and dull to make a clean cut and can crush the head. Dedicated cigar scissors with fine, sharp blades are a better choice.
Reader questions
Questions & answers
No questions yet. Ask the first one.
