Guides
The torcedor: the craft of the cigar roller
The torcedor is the Spanish name for a cigar roller, the craftsperson who assembles filler, binder and wrapper into a finished hand-made cigar. The word comes from the Spanish verb for twisting, and the role is at the heart of traditional cigar manufacture, especially in Cuba, where rolling is regarded as a skilled trade.
What a roller does
A roller takes prepared leaf and turns it into a cigar. The work involves arranging filler leaves into a bunch, wrapping the bunch in a binder, shaping it, applying the wrapper and finishing the head. Each step requires judgement, because every leaf differs slightly, and the roller must adjust the amount of leaf, its position and the pressure applied so the cigar draws and burns properly.
The tools
The equipment is simple. A roller typically uses a flat work surface or board, a curved blade called a chaveta to cut and trim leaf, a pot of natural vegetable gum to seal the wrapper, and a guillotine or blade to cut the foot of the finished cigar to length. Much of the work is done with the hands, and the quality of the cigar rests on practised touch more than on machinery.
The sequence of work
First, the roller selects and arranges the filler so that air channels run along the cigar and the draw is easy. The bunch is then wrapped in the binder, and the roughly formed cigar is often pressed in a mould for a time to hold its shape. Next the wrapper is cut to a suitable shape with the chaveta and wound around the bunch in a spiral, with a small cap or head created at one end and sealed with gum. Finally the foot is trimmed to the correct length.
Different traditions vary the order and the details, but the same basic stages appear nearly everywhere hand-made cigars are produced.
Skill and consistency
The hardest challenge is consistency. A roller has to make cigars that match in weight, length, firmness and appearance, even though each leaf is different. The roller learns by feel how much filler a particular vitola needs and how firmly to pack it. Too tight, and the cigar draws poorly; too loose, and it burns hot and fast.
Experienced rollers can make large numbers of cigars in a day, but figures vary by factory, vitola and rules, so they are not quoted here.
The factory setting
In many Cuban factories, rollers work at benches in large rooms, usually in rows, and they are often organised in teams with supervisors who check the work. Output may be counted and quality checked at regular points. The tradition of having a reader, known as a lector, who reads aloud to the rollers while they work is widely associated with Cuban cigar factories, although how common it is today varies and should be checked for any particular factory.
Training and progression
Becoming a roller takes time. Trainees begin with simpler tasks and simpler cigars, and they move to more difficult shapes as their skill grows. Some factories rank rollers in grades according to the complexity of cigars they are trusted to make, and this system is discussed in the article on roller grades. The path from apprentice to master roller is generally measured in years, not weeks.
Rolling is also physically demanding. The repetitive work of the hands, the posture at the bench and the focus required make it a craft that demands endurance as well as skill.
Hand-made does not mean identical
Because each cigar is made by a person, tiny differences are normal. A good cigar is not one with zero variation but one that stays within the limits the factory sets for length, ring gauge, weight and draw. Inspection after rolling is intended to catch the ones that fall outside those limits.
Frequently asked questions
What is a torcedor?
A torcedor is a cigar roller, the person who makes a hand-made cigar by assembling filler, binder and wrapper.
What is a chaveta?
A chaveta is the curved blade rollers use to cut and trim leaf, especially the wrapper.
Do rollers use machines?
In traditional hand-made production the work is done by hand with simple tools, plus a mould and press to help shape the cigar.
Reader questions
Questions & answers
No questions yet. Ask the first one.
