Cigars & vitolas
Ring gauge explained
Ring gauge is the measurement of a cigar's diameter, expressed in sixty-fourths of an inch. A cigar with a ring gauge of 50 is therefore fifty sixty-fourths of an inch thick, which is just under an inch across. It is one of the two numbers, along with length, that define a cigar's vitola.
What the number means
The unit is a sixty-fourth of an inch, so the ring gauge is simply the diameter multiplied by sixty-four. A 64 ring gauge would be exactly one inch wide, a 32 would be half an inch, and a 48 would be three-quarters of an inch.
The odd-looking unit is a historical convention. It is used for convenience because cigar makers worked with fractions of an inch, and sixty-fourths gave a scale of whole numbers that was easy to communicate and compare.
Why it is called a ring gauge
The name is usually explained by the tool historically used to check thickness: a gauge with a circular opening through which the cigar is passed. If the cigar fits through the ring of a given size, it is not thicker than that gauge. Whatever the exact origin of the name, the practical meaning today is just diameter.
Converting to other units
To turn a ring gauge into inches, divide by 64. To turn it into millimetres, multiply the inches by 25.4. A ring gauge of 42 comes out at roughly 16.7 millimetres, and a ring gauge of 52 at roughly 20.6 millimetres.
Many catalogues, particularly outside the English-speaking world, give diameters in millimetres or list only the ring gauge number. Knowing the conversion makes it easy to move between systems.
Thin, medium and thick
There are no official categories, but a rough working vocabulary exists. Ring gauges in the low thirties and below are generally considered slim. Numbers in the forties are medium and include many classic shapes. Gauges in the fifties and above are thick, sometimes called fat or gordo shapes.
Trends have moved over time. Thick ring gauges became very popular in the later twentieth century, while classic cigars were often thinner. Preferences continue to vary by region and by individual.
How ring gauge affects the smoking experience
Diameter influences how a cigar burns and how it feels in the mouth and hand. A thicker cigar generally has a larger volume of filler and can burn cooler and more slowly, while a thin cigar can burn faster and warm up sooner. Many smokers describe thin cigars as emphasising the wrapper, since a higher proportion of the leaf by volume is wrapper, while thicker cigars are said to emphasise the blend inside.
These are generalisations rather than rules. Construction quality, the tobacco itself and the way the cigar is smoked all matter at least as much as thickness. Ring gauge is a guide to character, not a guarantee of it.
Thickness also affects practicalities such as the cutter needed. A very thick cigar may not fit in a narrow guillotine, and a slim one may be better served by a smaller cut.
Ring gauge and length together
The ring gauge on its own does not describe a vitola. A short cigar and a long cigar can share the same diameter, and the proportion between them determines how the cigar looks and smokes. The entry on cigar length and measurement systems covers the other half of the specification.
When both numbers are known, a cigar can be placed in the family of named shapes, such as a Robusto or a Corona. The articles on those vitolas give typical dimensions for each.
Measuring at home
A simple ruler is enough for rough measurement of the diameter in millimetres, which can then be converted. A gauge made for the purpose is more precise. Because cigars are handmade and slightly soft, small variations are normal, and a measurement a point either side of the stated number is not unusual.
Frequently asked questions
Is a higher ring gauge always better?
No. Ring gauge describes thickness only. Which size suits a smoker depends on taste, time available and the character of the blend, not on the number alone.
How do I convert ring gauge to millimetres?
Divide the ring gauge by 64 to get inches, then multiply by 25.4. For example, 50 divided by 64 is about 0.78 inches, which is roughly 19.8 millimetres.
Can two cigars with the same ring gauge feel different?
Yes. Length, construction and how firmly the cigar is packed all change the feel, so identical diameters do not guarantee identical handling.
Reader questions
Questions & answers
No questions yet. Ask the first one.
