• Secure payment

Guides

Regalia and other historic size names

By Vitola Room Editorial TeamVitola Room Editorial · 3 min read

Regalia is one of many historic names once used for cigar sizes, and it belongs to a family of terms such as corona, panetela and lonsdale that have changed meaning over time. These names describe shape and size, but they were never governed by a single international standard.

Why size names are confusing

Cigar naming grew up piece by piece. Manufacturers coined names for their own shapes, some of which were adopted by other brands and some of which were not. A name could be applied to a slightly different dimension in a different house. As a result, a "corona" from one maker may not match a "corona" from another. The most dependable method is to read length and ring gauge, which are measurements, and treat names as hints.

Some well-known historic names

  • Corona: a classic medium-length, medium-thickness size, long treated as a reference point. The name means "crown" in Spanish.
  • Panetela: a long, slender cigar. The origin of the word is debated.
  • Lonsdale: a longer cigar, a name traditionally linked to a British nobleman, though the story of its coining is often told in different ways.
  • Churchill: a large cigar named after the British statesman. The connection is a matter of tradition and association.
  • Lancero: a long, thin cigar, with a name that suggests the shape of a lance.
  • Perfecto: a shape tapered at both ends.
  • Torpedo and pirámide: shapes with a pointed head.

Where regalia fits in

Regalia (or regalías) appears in older and brand-specific nomenclature as a term for a size, but its dimensions have not been uniform across history and across brands. A careful writer treats it as a historical or brand-specific name and checks the actual measurements. It is a good example of why names alone cannot be relied upon.

Factory name and commercial name

Cuban practice adds another layer. As explained in marca, vitola and liga, a factory may use one name for a size on the rolling floor while the box shows a different commercial name. Older names often survive in factory usage long after the commercial labels have changed. This is why a single size can have two or even more names in circulation.

How to compare sizes reliably

  1. Note the length, usually in inches or millimetres.
  2. Note the ring gauge, the diameter measured in sixty-fourths of an inch.
  3. Note the shape: straight, tapered, pointed or irregular.
  4. Only then consider the name.

A heritage vocabulary

Many of these names evoke earlier eras: royalty, aristocracy, military life and politics. They are part of the charm of cigar writing, and they appear in the glossary and in the history of brands. They also invite caution, because anecdotes about who first used a name or why are often repeated without a solid source. It is better to say that a name is "traditionally associated" with a person or place than to state it as certain fact.

Examples of how names drift

Consider how a name can move. A term first applied to one long, thin shape may later be applied to a slightly thicker one. Another may be used by one brand for a short size and by another for a long size. Over time, readers lose track of the original sense. Even the idea of a "standard" Corona is mostly a convention among writers, who use it as a rough midpoint against which to describe other cigars as longer, shorter, thicker or thinner.

The same drift happens in translation. A Spanish name may be kept, anglicised or replaced by an English equivalent, and the same cigar can end up with several names in print. That is one more reason to rely on figures.

Modern usage

Today the trade uses a mix of classic names and newer ones. Retail and review writing often adopts a shorthand set of names, such as robusto or double corona, that are widely understood but still not formally standardised. Treat them as common usage, not regulation.

Frequently asked questions

Is there an official list of cigar size names?

No single worldwide list is binding. Producers define their own, and trade usage varies, so measurements are the safest reference.

Is regalia a specific size?

It is a historic or brand-specific name, and its dimensions have varied. Check the stated length and ring gauge instead of relying on the word.

Why are so many names linked to famous people?

Naming a shape after a notable figure was a traditional marketing habit, but the stories are often retold loosely, so they should be treated as tradition rather than proven history.

Reader questions

Questions & answers

No questions yet. Ask the first one.