• Secure payment

Guides

Cigar moulds and presses

By Vitola Room Editorial TeamVitola Room Editorial · 3 min read

Cigar moulds and presses are the simple tools used to give a hand-rolled cigar its final shape. After a roller has formed the cigar, it is placed in a wooden mould and pressed for a period of time, which sets the length, ring gauge and form, and helps all cigars of a given vitola come out uniform.

What a mould is

A cigar mould is typically a pair of wooden boards with rows of half-cylindrical channels, usually cut into each board so that when the boards are placed together they form a row of complete cylindrical cavities. Each cavity is shaped for a particular size of cigar. The material is traditionally wood, partly because it is easy to work, and partly because it handles moisture reasonably well.

Where moulding fits in

The cigar is first bunched and wrapped in binder. This rough cigar is then placed in the mould, and the mould is closed and held under pressure. In the Cuban method the bunch is usually moulded before the wrapper is applied, though the exact sequence can vary with the style of manufacture. The purpose is to make the bunch firm, even and consistent in diameter.

The press

The filled mould is placed in a press that squeezes the two halves together. Traditional presses use screws or levers to hold the mould tight. The pressure is not intended to crush the cigar but to give it shape and even density. The time spent in the press varies, and the roller or the supervisor decides when the cigars are ready to come out. The press may be applied more than once, and the cigars may be turned between presses to even out the shape.

Exact pressure and times are not given here as they differ between factories and between vitolas.

Shape and vitola

The vitola, meaning the size and shape of the cigar, determines which mould is used. Parejo vitolas, which have straight sides and a round head, use straight cavities. Figurado vitolas, which have curved or tapered shapes such as a torpedo or pyramid, need moulds with matching contours. Complex shapes are harder to mould and to roll, and they tend to be assigned to more skilled rollers.

Consistency across a box

A mould's biggest contribution is uniformity. Because each cavity has the same dimensions, cigars made in the same mould come out with the same diameter and a similar firmness. This makes it possible for a box of cigars to look even and for each cigar to behave similarly when smoked. Without moulds, variation among hand-made cigars would be far greater.

Care of the equipment

Moulds are subject to wear and moisture. Wood can warp or collect residue, and cavities that lose their shape would affect the cigars. Factories keep their moulds clean and replace damaged ones. Some moulds are made to specific tolerances, and the dimensions of the cavities are checked to make sure that a vitola stays within its specification.

Humidity and drying in the mould

A cigar in a mould is still slightly moist from rolling, and the mould helps it dry in shape. The wood absorbs a little of that moisture and the cigar settles gradually into the form of its cavity. If a cigar were left to dry unsupported, it could curl, flatten or lose its roundness. Factories often rest the cigars in a controlled room after moulding, so that the remaining moisture equalises before the cigars are inspected and moved on to the next stage.

Moulding versus machine production

In machine-made cigars, shaping is built into the process: the machine forms and cuts cigars to length automatically. In hand-made production, the mould is one of the few mechanical aids that is accepted, because it supports the roller's work and does not replace it. This distinction is part of the discussion in the article on hand-made versus machine-made cigars.

Frequently asked questions

Why are cigars put in moulds?

Moulds hold the freshly rolled cigar in shape so that it dries firm, even and uniform in size.

Are moulds made of metal or wood?

Traditional moulds are wooden. Some makers may use other materials, but wood is the classic choice.

Does pressing damage the cigar?

Pressing is meant to shape and settle the cigar, not crush it. Too much pressure would harm the draw, so it is controlled.

Reader questions

Questions & answers

No questions yet. Ask the first one.