Guides
Quality control in Cuban cigar factories
Quality control in Cuban cigar factories is the system of checks that aims to make sure each hand-made cigar meets the standard for its brand and vitola. It combines inspection of leaf, supervision of rollers, measurement of finished cigars and selection before boxing, and it runs through nearly every stage of production.
A chain of checks
Quality in a hand-made cigar cannot be added at the end. It has to be built in at each stage, which is why factories check leaf when it is received, again after it is sorted and conditioned, during rolling and after the cigar is finished. Each check catches a different kind of problem, and together they reduce the chance that a faulty cigar will be packed.
Checking the leaf
Before rolling, leaf is examined for condition, moisture and cleanliness. Leaf that is mouldy, damaged or off in aroma is set aside. Wrapper is assessed for colour and surface. Filler and binder are assessed for type and condition. The aim is to give rollers leaf that is suitable for the blend they are making.
Supervision at the bench
During rolling, supervisors and inspectors walk the floor and examine cigars as they are made. They check things such as the firmness of the bunch, the neatness of the wrapper and the shape of the head. A roller whose cigars drift from standard is corrected on the spot. This early intervention prevents a whole batch of poor cigars from being made.
Measuring the finished cigar
Once cigars are rolled and rested, they are measured against the specification of their vitola. Length and ring gauge are verified, and weight may be checked. Draw testing, whether done by machine or by hand, is used to identify cigars with an unsuitable draw. Cigars that fail these checks may be rejected or redirected, depending on the factory's rules.
Selection and sorting
After the cigars pass inspection, they are sorted by wrapper colour so that those packed together look alike. This colour selection is covered in a separate article on colour matching. Selectors also look for visual flaws that would be unacceptable in a box. Cigars that are sound but do not fit the top tier of appearance may be used for other purposes, depending on the practice of the producer.
Brand standards and the wider system
Cuban cigars are produced in factories that operate within a national industry structure, and the brands are marketed through an official distribution organisation. Standards are therefore partly shaped by that system, including rules about presentation and guarantee markings on boxes. The specific rules and any internal inspection procedures are not described here in detail because they are not fully published, and they may change.
Training and accountability
Quality control depends on people knowing what a good cigar looks and feels like. Inspectors and supervisors are generally experienced, often former rollers. Rollers may be held accountable for the quality of what they produce, and the grading system discussed in the article on roller grades links skill to responsibility. A culture of pride in the work supports the formal checks.
Handling rejects
Not every cigar that fails a check is simply thrown away. Depending on the reason, a cigar may be re-rolled, its leaf may be recovered for other use, or it may be directed to a different product line. How rejects are handled is a commercial decision for each producer, and it affects costs, but the principle is the same everywhere: a cigar that does not meet the standard for its brand should not be packed under that brand.
What smokers can take from this
For a smoker, the existence of quality control does not guarantee perfection, since hand-made cigars will always show some variation. It does mean that the large majority of cigars have been through multiple checks. When a cigar does turn out to have a problem, such as a very tight draw, it is usually the exception and not the standard.
Frequently asked questions
Is every Cuban cigar inspected?
Cigars go through multiple checks, but the exact extent of inspection at each stage depends on the factory and is not uniformly documented.
Who does the inspection?
Supervisors, inspectors and selectors, who are generally experienced people from within the factory.
Can a hand-made cigar still have faults?
Yes. Hand-made production allows small variations, and occasional faults may slip through despite the checks.
Reader questions
Questions & answers
No questions yet. Ask the first one.
