• Secure payment

Guides

First fermentation: the pilones

By Vitola Room Editorial TeamVitola Room Editorial · 4 min read

First fermentation is the stage in which cured tobacco leaf is stacked into large piles, known in Spanish as pilones, so that natural heat and moisture can begin transforming the leaf. It is the first controlled step of leaf processing after the leaf has been cured on the farm, and it shapes how a cigar will later smell, taste and burn.

Why leaf is fermented at all

Freshly cured tobacco is not ready to be smoked. It carries harsh, raw characteristics, a high level of unstable compounds and a greenish edge that gives an unpleasant bite. Fermentation is the answer that tobacco makers have relied on for generations to calm those traits down. During this process, the leaf is held under conditions where microbial and chemical activity changes its composition gradually.

Producers generally describe the aims in plain terms: reduce harshness, release some of the ammonia-like smells that cured leaf gives off, even out the colour, and bring the leaf closer to a stable condition in which it can be stored and later blended. The exact chemistry is complex and still studied, so it is safest to say that fermentation is a managed, heat-driven maturation rather than a single reaction.

What a pilon is

A pilon is simply a pile of leaf, built up in layers in a dedicated room or warehouse. Leaves are usually arranged in bundles or hands with their tips pointing inward, so that the pile is firm and compact. The size of the pile depends on the type of leaf and on the tradition of the factory or growing region. Delicate wrapper leaf is normally handled in smaller, gentler piles than robust filler leaf, because strong heat can mark or damage thin leaf.

Before piling, the leaf is brought to a suitable level of moisture. If it is too dry, the pile will not warm properly; if it is too wet, the leaf risks spoiling. This is why experienced workers judge the leaf by touch and smell as much as by instruments.

Heat as the working force

Once a pilon is built, its interior begins to warm by itself. The centre of the pile warms more than the outside, and that internal heat is the signal that the process is working. Because too much heat can harm the leaf, the pile is monitored with thermometers inserted into the centre or by simple hand checks. When the interior reaches a level considered appropriate for that leaf, the pile is taken apart and rebuilt.

No single target temperature is quoted here, because the acceptable range differs by leaf type, region and house practice. What is consistent across traditions is the principle: allow the pile to warm, stop it before it overheats, and repeat.

Turning the pile

Rebuilding the pile is called turning. Workers shake out the leaf, loosen it so that excess heat and gases escape, and then restack it so that leaves that were on the outside move to the inside and the other way round. This evens out the treatment across the whole pile. A leaf that sat on the cool outer edge for one cycle will spend the next cycle near the warm core.

Each turning also releases ammonia and other volatile compounds, which workers can often smell in the room. A fermentation room is typically recognisable by its sharp, sweetish, earthy odour. Over successive cycles the smell becomes milder, which is one practical sign that the leaf is settling.

Different leaf, different handling

Wrapper, binder and filler do not all receive the same treatment. Wrapper needs to stay supple, elastic and visually clean, so it is typically fermented with more restraint. Filler leaf, especially the stronger types taken from the upper part of the plant, can tolerate and often benefits from a more vigorous process. Binder lies between the two.

In many traditions, the leaf is also kept separate by type, by farm or by harvest, so that the factory can later trace what it is blending. Keeping lots separate also lets the fermenters adjust the process for each lot, which matters when one farm's leaf behaves differently from another's.

How long it takes

There is no universal duration. Some lots are ready after relatively short cycles, others need longer, and the decision is made by watching the pile rather than by following a calendar. Producers speak of the leaf being ready when it has lost its raw smell, taken on a more uniform colour and feels right in the hand.

After first fermentation, the leaf is usually sorted, dried to a stable condition and sent on for further ageing and a second fermentation, which refines what the first stage began.

Common risks

The main risks are overheating, uneven moisture and contamination. Overheated leaf can lose character or take on a burnt, flat quality. Uneven moisture produces patches that ferment differently. Mould or rot can appear if wet leaf is left without turning. All of these are controlled by attention: regular checks, careful turning and clean storage. The people who supervise pilones are therefore valued for their judgement, and their decisions can affect an entire harvest.

Frequently asked questions

What does pilon mean in tobacco?

A pilon is a pile of cured tobacco leaf stacked so that it warms naturally and ferments. The word is Spanish and is used throughout the Spanish-speaking tobacco world.

Is the pile heated from outside?

In the traditional method the heat is produced by the leaf itself inside the pile, not by an external source. Workers manage it by controlling moisture, pile size and turning.

Is first fermentation the same as ageing?

No. Fermentation is an active, heat-driven stage. Ageing is a slower, quieter period of rest that usually follows it.

Reader questions

Questions & answers

No questions yet. Ask the first one.