• Secure payment

Guides

Draw-testing machines and quality checks

By Vitola Room Editorial TeamVitola Room Editorial · 3 min read

A draw-testing machine is a device that measures how easily air passes through a cigar, which is a good indicator of how it will feel when smoked. Draw testing is one of several quality checks that cigar factories use to find cigars that are too tight or too loose before they reach a box.

What draw means

Draw is the resistance a smoker feels when pulling air through a lit or unlit cigar. A good draw offers gentle resistance, allowing smoke to flow without effort. A draw that is too tight feels like sucking through a straw that is nearly blocked and tends to cause hot, bitter smoke. A draw that is too loose lets smoke rush through and can make the cigar burn hot and quickly. Draw is partly a matter of taste, but extremes are generally regarded as faults.

How a draw tester works

The basic principle is simple. A cigar is held in a fitting at one end, and the machine applies a standard suction or airflow and measures the result. If air passes through easily, the reading indicates an open draw. If the air is held back, the reading indicates a tight draw. By comparing the reading with an acceptable range set by the factory, an operator can accept or reject the cigar.

Machines differ in design, and some read electronically while others use simpler gauges. The details of any specific device are not described here because they vary between manufacturers.

Where it fits in production

Draw testing is generally done after the cigar has been rolled and has had time to settle. Some factories test every cigar, others test samples from each roller or each batch. Results feed back to the roller and supervisor. If many cigars from one roller are too tight, for instance, the roller may be packing the filler too firmly or placing leaves in a way that blocks the airflow.

Other physical checks

Draw is only one measure. Factories also check length, ring gauge and weight, since these determine whether a cigar meets the specification for its vitola. Measuring tools such as callipers and gauges are used, and a scale checks weight. Firmness is often judged by hand, with a trained inspector rolling the cigar gently between the fingers to feel for soft spots or hard knots.

Visual checks look at the wrapper for tears, stains, uneven colour, bad seams or a poorly formed head. Even small blemishes can lead a cigar to be set aside or sent to a lower tier.

Why machines and hands both matter

A machine gives repeatable readings that do not depend on a person's mood or fatigue. A human inspector, meanwhile, notices a range of things that a simple device does not, such as odd smells or a cigar that feels unbalanced. Many factories combine both approaches. The measurement provides objectivity, and the inspector provides judgement.

Beyond the cigar itself

Quality checks extend to the leaf and to the environment: moisture of the tobacco, cleanliness of the rooms, and conditions in storage. A cigar that draws badly may be traced back to leaf that was too wet, to poor bunching, or to a mould that has lost its shape. Draw data therefore helps identify problems upstream as well as in the final product.

Reading the results

Data from draw testing is most useful when it is looked at in aggregate. If readings for one vitola drift tight across several rollers, the cause may be the leaf, the mould or the specification itself. If the problem sits with one roller, training is the more likely answer. Supervisors who track these patterns can intervene early, which saves leaf and reduces the number of cigars that must be rejected at the end of the line.

Limits of testing

No test can predict every aspect of a smoking experience. A cigar can measure well on a machine and still have an odd burn due to leaf variation. Conversely, a cigar with a slightly unusual draw reading may smoke perfectly well. Testing reduces the number of poor cigars that reach customers, but it does not replace the smoker's own judgement.

Frequently asked questions

What is a draw tester?

It is a device that measures how much resistance a cigar offers to airflow, helping to find cigars that are too tight or too loose.

Is every cigar tested?

Practice varies. Some factories test every cigar, others sample from each roller or batch.

What causes a tight draw?

Common causes include overfilled or poorly arranged filler, leaf that is too wet, and blocked channels inside the bunch.

Reader questions

Questions & answers

No questions yet. Ask the first one.