• Secure payment

Guides

Cutting pyramids, torpedos and perfectos

By Vitola Room Editorial TeamVitola Room Editorial · 4 min read

Figurados are cigars whose shape is not a simple cylinder, and pyramids, torpedos and perfectos are the best-known examples. Because their heads taper or swell, they need a little more thought when cutting than a parallel-sided cigar, and the right approach depends on the shape in hand.

What figurados are

A figurado is any cigar shaped differently from a straight tube. A pyramid has a broad body that narrows to a pointed head. A torpedo usually keeps a straight body and tapers only near the head, though the two names are often used loosely and even interchangeably. A perfecto is closed or narrowed at both ends and wider in the middle, a little like a spindle.

These shapes are harder to roll than straight cigars and are admired for the skill they require. They are also trickier to open, because the usual straight cut across the cap does not suit a head that narrows to a point.

Why the taper matters

On a parallel cigar, the cap is a flat disc at the end. On a tapered head, the cap sits on a narrow tip and the filler beneath is slender. If a cutter slices too far down the cone, the opening becomes large and the wrapper may loosen.

The opposite risk exists as well. Cut too close to the tip and the opening may be tiny, giving a pinched draw. The goal is to cut at a point where the opening is wide enough to be comfortable and the cap still holds.

Cutting a pyramid or torpedo

Scissors are the most controlled option, since they allow a small, deliberate snip across the point. A guillotine can also work if the opening is positioned carefully, with the blade crossing near the very tip.

A V-cutter is a popular choice because it fits the narrow head and leaves cap around the notch. A punch can work on a broader pyramid head but may not enter a slim torpedo tip cleanly.

  1. Look at the tip and judge how far the cap extends down the cone.
  2. Make a small cut near the point, removing only a little.
  3. Take a dry draw. If it is tight, deepen the cut slightly.

Cutting a perfecto

A perfecto often has a closed, rounded foot as well as a tapered head. The head can be cut in the manner of a torpedo. The foot is sometimes snipped open slightly before lighting, since it may be closed or very narrow. Some smokers simply toast and light the foot, letting the first few puffs open it naturally.

Take care not to cut too deeply on either end. The narrow ends are the weakest parts of the structure, and an aggressive cut can unravel them.

Common problems

  • Cutting too far down the cone. This exposes too much filler and weakens the wrapper.
  • Cutting too little. The result is a pinched, restricted draw.
  • Crushing the tip. A dull blade squeezes the narrow head, making a ragged opening.
  • Cutting at an angle. The airflow becomes uneven.

Matching the tool to the shape

There is no universal rule, but a few tendencies help. Scissors and V-cutters are often favoured for sharp points. A guillotine suits a pyramid with a relatively broad head. Punches are less common for the narrowest tips.

What matters most is a sharp tool and a patient approach. Shaped cigars reward a careful hand, and a small first cut that is deepened if needed is nearly always the safest plan.

Patience with unusual shapes

Figurados reward patience. They take more skill to roll than simple parallel cigars, and the shaped head is part of what makes them appealing. Rushing the cut and damaging the point spoils that effort. It helps to hold the cigar level, look straight at the head and decide in advance where the cut will land. If you are unsure, make a very small first cut and test the draw. Remember too that the opening on a tapered head grows quickly as you cut lower, so each additional millimetre changes the draw more than on a straight cigar. Small, careful steps are the best habit.

Frequently asked questions

What is the best cutter for a pyramid?

Scissors or a V-cutter are common choices because they handle the taper well. A guillotine can also work if the blade crosses the narrow tip carefully.

How much of a torpedo tip should I cut?

Cut only a little, enough to open the filler without going far down the cone. Test with a dry draw and deepen if needed.

Do I need to cut the foot of a perfecto?

Some perfectos have a closed foot that can be snipped slightly or simply toasted and lit. Either approach is common.

Reader questions

Questions & answers

No questions yet. Ask the first one.